The refrigerator is one of those appliances that gets wiped on the outside and quietly ignored on the inside until something smells. A thorough cleaning takes about an hour, needs nothing more exotic than dish soap, warm water and baking soda, and makes a visible difference. Here is a practical order of operations that avoids the usual mistakes.

Before you start: empty it, but keep food safe

Plan the job for the day before a grocery run, when the fridge is at its emptiest. Take everything out and set perishables in a cooler or an insulated bag with ice packs while you work. Cold food left on the counter is the one real risk in this job, so work in one focused stretch rather than stopping halfway.

As food comes out, check dates and sniff-test leftovers. Condiment bottles are worth a second look: the rims and caps collect sticky residue, and many people find jars they bought years ago in the back of the door shelves. Toss what is expired and wipe the containers you keep with a damp cloth before they go back in.

Take out the shelves and drawers

Most shelves, crisper drawers and door bins lift out or slide off. Remove them and let glass shelves come up to room temperature before washing them in warm water. Cold glass hit with hot water can crack, so avoid the temptation to rush it. Wash everything in the sink with dish soap and a sponge, rinse, and dry fully before putting it back. Plastic bins with a stubborn film usually respond to a paste of baking soda and a little water left for a few minutes.

If something will not come out easily, check your owner’s manual rather than forcing it. Plastic tabs break more often than they release.

Wipe the interior from top to bottom

Mix about a tablespoon of baking soda into a quart of warm water. Dip a cloth, wring it well, and wipe the ceiling, walls and back panel, working from the top down so drips land on surfaces you have not cleaned yet. Baking soda is gentle, does not leave a strong scent behind, and helps lift the odor-causing residue that plain water leaves.

Finish with a cloth dampened with plain water to remove any soap or baking soda film, then dry with a clean towel. Leaving moisture behind invites mildew.

What not to use

Skip bleach-heavy sprays and strong fragranced cleaners on surfaces that touch food. Residue and fumes can linger and may transfer a taste to open food. Also avoid abrasive scouring pads, which scratch the plastic liner and give grime more places to cling. If you are wondering whether a particular product is safe together with another, our guide on which cleaning products should you never mix covers the combinations to avoid.

Deal with the outside, too

The door handles are among the most-touched surfaces in a kitchen. Wipe them with warm soapy water, then dry. For stainless steel, wipe with the grain and use a barely damp microfiber cloth; going against the grain can make streaks more obvious. Do not spray cleaner straight onto the door, because liquid can run into seams and the control panel. Spray the cloth instead.

If your fridge has a water or ice dispenser, wipe the tray and nozzle area as well. Standing water there is where film tends to build up.

The part most people skip: coils and the floor underneath

Dust and pet hair collect on the condenser coils, usually behind the bottom grille at the front or on the back of the unit, depending on the model. Check your manual to find them. Unplug the fridge first, then use a vacuum with a brush attachment or a long coil brush to remove the buildup. Coils packed with dust make the compressor work harder, so this step matters more than it looks.

While the unit is accessible, vacuum and mop the floor under and around it. If the fridge is heavy or on a hardwood or vinyl floor, be careful when pulling it out. Lift the front slightly or use furniture sliders to avoid gouging the floor, and do not move it more than you need to.

Putting it back together

Return the dry shelves and drawers, plug the unit back in if you unplugged it, and give it a little time to get cold before restocking. Group similar items together, put raw meat on the lowest shelf so nothing can drip onto other food, and consider an open box of baking soda on a shelf for ongoing odor control. Labeling leftovers with a date written on painter’s tape saves guessing later.

How often should you do this?

A full clean every three to four months is a reasonable rhythm for many households, with quick wipes of spills the moment they happen and a monthly check for expired items. A household with young kids, lots of leftovers or a big weekly grocery haul may want to go a little more often. Coils can usually wait longer, around twice a year, or more often if you have shedding pets.

When to hand it off

Some people simply would rather not spend an hour with their head in the fridge. If that is you, interior fridge cleaning is the kind of detail that fits into a deep cleaning visit, and it is a good thing to mention when you ask for a quote. Deep cleaning starts at $210 for a studio, $220 for a 1BR and $270 for a 2BR, assuming one bathroom and under 1,000 square feet, with final price depending on bathrooms, square footage and add-ons. You can see more on pricing in our Arlington house cleaning cost guide, and our kitchen deep clean guide lists other spots in the kitchen that tend to get skipped.

Arlington Home Cleaning is licensed and insured, and serves Arlington, VA, with Ashburn and the wider Northern Virginia area as well. If you would like to talk it through, call 571-350-0866.